MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 6 405
File System (Native Mode)
(Subsystem 143)
the target device. The spoolfile was created
and DEFERred..
-658 MESSAGE Problem: Failure in Creating the File IO
State Semaphore Table.
CAUSE Procedure FS_INITIALIZE_FILE_SYSTEM failed to
create the File IO State Semaphore Table.
ACTION Ask your system manager to investigate the problem and
reboot the system.
-659 MESSAGE Problem: Failure in initializing The File IO
State Semaphore Table.
CAUSE Procedure FS_INITIALIZE_FILE_SYSTEM failed to
initialize the File IO State Semaphore Table. ''
ACTION Ask your system manager to investigate the problem and
reboot the system.
1 MESSAGE Intrinsic layer; file number is not valid.
2 MESSAGE Intrinsic layer; the operation could not be
completed because caller lacked the proper
execution privilege level.
3 MESSAGE Intrinsic layer; an access violation
occurred.
4 MESSAGE Intrinsic layer; record number is not valid.
5 MESSAGE Intrinsic layer; number of records is not
valid.
6 MESSAGE Intrinsic layer; the process is out of
PLFD's.
7 MESSAGE Intrinsic layer; the maximum user label size
was exceeded.
8 MESSAGE Intrinsic layer; device type is not valid.
9 MESSAGE Intrinsic layer; this is an illegal
parameter.
10 MESSAGE Intrinsic layer; this is an unimplemented
function.
11 MESSAGE Intrinsic layer; FLOCK is unable to LOCK
file.
12 MESSAGE Intrinsic layer; the file is not LOCKED.
13 MESSAGE Intrinsic layer; the file has no user labels.
14 MESSAGE Intrinsic layer; no WAIT IO pending.
15 MESSAGE Intrinsic layer; no NOWAIT IO for specific
file.