MPE/iX Error Messages Manual Vol 1 (32650-90878)

358 Chapter4
Error Messages V i C 4
Error, Warning, and Status Messages
CAUSE An error occurred while reading from the fromfile at the
record number displayed (recnum).
ACTION Retry the operation. If the error persists, use the SUBSET
function to copy all of the file except the erroneous record.
302 MESSAGE VERIFY OPTION: RAN OUT OF VERIFY ERRORS AT
FROMFILE RECORD recnum
CAUSE The "verify" function was terminated because the specified
maximum number of errors has been exceeded at the
record number displayed (recnum).
ACTION Specify a larger number-of-errors parameter and retry the
operation.
303 MESSAGE RAN OUT OF IGNERRS AT FROMFILESREC
CAUSE More errors were found in the fromfile than are permitted
by the IGNERR option.
ACTION Specify a larger number-of-errors parameter and retry the
operation.
304 MESSAGE COMPARE OPTION: RAN OUT OF COMPARE ERRORS AT
FROMFILE RECORD
recnum
CAUSE The "compare" function was terminated because the
specified maximum number of errors has been exceeded at
the record number displayed (recnum).
ACTION Retry the operation specifying a larger number-of-errors
parameter.
601 MESSAGE END OF VOLUME SET
CAUSE The end of the last labeled tape of the volume set has been
reached.
ACTION None.
800 MESSAGE EOF IN FROMFILE BUT NOT IN TOFILE
{AT} {AFTER} {BEFORE} RECORD X
CAUSE The tofile is larger than the fromfile.
ACTION Purge the tofile and retry the operation using the NEW
option if you are copying to the tofile. Alternatively, purge
the tofile and rebuild it with the same attributes as the
fromfile, then retry the operation.
801 * MESSAGE EOF IN TOFILE BUT NOT IN FROMFILE
{AT} {AFTER} {BEFORE} RECORD X
Cause The tofile is smaller than the fromfile.
Action Purge the tofile and retry the operation using the NEW
option if you are copying to the tofile. Alternatively, purge