MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 3 301
Command Interpreter
(CIERR) 1901-12256
used.
ACTION Verify valid, available numeric values.
10632 MESSAGE VOLUME SET IS ALREADY OPEN. (CIERR 10632)
CAUSE An attempt was made to open an already open volume set.
ACTION None.
10633 MESSAGE VOLUME SET IS ALREADY CLOSED. (CIERR 10633)
CAUSE An attempt was made to close a volume set that is already
closed.
ACTION None.
10634 MESSAGE VSRESERVESYS (OR LMOUNT) IS IN EFFECT ON
VOLUME SET. (CIERR 10634)
10635 MESSAGE VOLUME SET OPEN IN PROGRESS. (CIERR 10635)
10636 MESSAGE VOLUME SET CLOSE IN PROGRESS. (CIERR 10636)
10637 MESSAGE VOLUME SET IN USE, CLOSE PENDING APPLIED TO
VOLUME SET. (CIERR 10637)
CAUSE A volume set CLOSE command was issued and volume set
specified is currently in use.
ACTION Wait for CLOSE to complete, or OPEN the volume set
specified.
10639 MESSAGE SPLIT CAN ONLY BE SPECIFIED FOR A MIRRORED
VOLUME SET. (CIERR 10639)
CAUSE The SPLIT option to VSCLOSE was specified for a
non-mirrored volume set.
ACTION Use the SPLIT option only for a mirrored volume set.
10604 MESSAGE VOLUME SET WAS NOT PHYSICALLY MOUNTED ON
SYSTEM. (CIERR 10604)
CAUSE If the named volume set is on the system, possible cause is
that PARTVS=BACKUP was specified for a
nonsplit-volume set.
ACTION Repeat the VSOPEN or VSCLOSE command without the
PARTVS parameter.
10640 MESSAGE VOLUME SET WITH MISSING VOLUMES CANNOT BE
SPLIT. (CIERR 10640)
CAUSE The mirrored volume set to be split has suspended or
disabled volumes.
ACTION Replace all missing volumes with the VOLUTIL
REPLACEMIRRVOL command before retrying the split.
10641 MESSAGE VOLUME SET CANNOT BE SPLIT WHILE UNDER