MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 149
Command Interpreter
(CIERR)
1779 MESSAGE INTEGER NOT IN RANGE 0 - 15. (CIERR 1779)
CAUSE The integer value entered was less than zero (0) or greater
than 15.
ACTION Reenter the command making sure the integer value
specified is within the range of 0 to 15.
1780 MESSAGE DRIVER NAME > 8 CHARACTERS LONG. (CIERR 1780)
CAUSE The driver name specified was more than 8 characters
long.
ACTION Reenter the command making sure the driver name is less
than or equal to 8 characters.
1781 MESSAGE INTEGER NOT IN RANGE 0 - 127. (CIERR 1781)
CAUSE The integer value entered was less than zero (0) or greater
than 127.
ACTION Reenter the command making sure the integer value
specified is within the range of 0 to 127.
1782 MESSAGE REQUIRES AT LEAST A LINE NAME. (CIERR 1782)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1783 MESSAGE REQUIRES ACTUAL LINE DESIGNATOR. (CIERR 1783)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1784 MESSAGE BACK REFERENCE TYPE LINE SPECIFICATION MAY
NOT HAVE MORE THAN THE LINE NAMES INVOLVED.
(CIERR 1784)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
1785 MESSAGE IF'S AND ELSE'S MUST BE PAIRED WITHIN USER
COMMANDS. (CIERR 1785)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1786 MESSAGE IF'S AND ENDIF'S MUST BE PAIRED WITHIN USER
COMMANDS. (CIERR 1786)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1793 MESSAGE HELP ENCOUNTERED END OF FILE ON INPUT. (CIERR
1793)
CAUSE The HELP catalog is empty.