MPE/iX Error Messages Manual Vol 1 (32650-90878)

148 Chapter2
Command Interpreter
(CIERR)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1771 MESSAGE SYNTAX ERROR IN LINE SPECIFICATION. (CIERR
1771)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1772 MESSAGE INTEGER OUT OF RANGE OR BAD FORMAT. (CIERR
1772)
CAUSE Same as the message.
ACTION Review the command and then reissue it.
1773 MESSAGE INTEGER NOT IN RANGE 0 - 255. (CIERR 1773)
CAUSE The integer specified was less than zero (0) or greater than
255.
ACTION Reenter the command making sure the integer specified is
within the range of 0 to 255.
1774 MESSAGE EXPECTED A COLON (:) HERE. (CIERR 1774)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1775 MESSAGE EXPECTED ONE OF KEYWORDS FOR CLINE COMMAND.
(CIERR 1775)
CAUSE Syntax error.
ACTION Check the syntax and reenter the CLINE command.
1776 MESSAGE DEVICE NAME MAY NOT BE MORE THAN 8 CHARACTERS
LONG. (CIERR 1776)
CAUSE The device name specified was more than 8 characters in
length.
ACTION Reenter the command making sure the device name
specified is less than or equal to 8 characters.
1777 MESSAGE THIS KEYWORD REDUNDANTLY SPECIFIED. (CIERR
1777)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1778 MESSAGE INTEGER NOT IN RANGE 0 - 63. (CIERR 1778)
CAUSE The integer value entered was less than zero (0) or greater
than 63.
ACTION Reenter the command making sure the integer value
specified is within the range of 0 to 63.