MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 141
Command Interpreter
(CIERR)
charactaer.
1700 MESSAGE MAXIMUM OF 2 PARAMETERS. (CIERR 1700)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
1701 MESSAGE PARAMETER NOT ONE OF CS,DS,ES OR 0. (CIERR
1701)
CAUSE Same as the message.
ACTION Check the syntax and reenter the command.
1702 MESSAGE DEFAULT PRIORITY OF 0 NOT ALLOWED. DEFAULTED
TO CS. (CIWARN 1702)
CAUSE Same as the message.
ACTION None; the message is for information only.
1703 MESSAGE DEFAULT OF CS EXCEEDS MAXIMUM OF DS. (CIERR
1703)
CAUSE Same as the message.
ACTION Review the dispatcher queue parameters.
1704 MESSAGE DEFAULT OF CS EXCEEDS MAXIMUM OF ES. (CIERR
1704)
CAUSE Same as the message.
ACTION Review the dispatcher queue parameters.
1705 MESSAGE DEFAULT OF DS EXCEEDS MAXIMUM OF ES. (CIERR
1705)
CAUSE Same as the message.
ACTION Review the dispatcher queue parameters.
1710 MESSAGE NAME OF JCW TO BE SET NOT FOUND. (CIERR 1710)
CAUSE The name of the JCW to be set was not specified.
ACTION Specify a name for the JCW to be set with the SETJCW
command.
1711 MESSAGE NO VALUE SPECIFIED FOR JCW TO BE SET TO.
(CIERR 1711)
CAUSE The value for the JCW to be set was not specified.
ACTION Specify a value for the JCW to be set with the SETJCW
command.
1712 MESSAGE VALUE NOT IN RANGE--LEGAL RANGE IS 0 TO
65535. (CIERR 1712)
CAUSE The value specified was less than 0 or more than 65535.