MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 131
Command Interpreter
(CIERR)
USED. (CIWARN 1551)
CAUSE The JOB parameter was specified more than once. The
last value entered was used by the system.
ACTION To specify a value other than the value used by the system
reenter the command.
1552 MESSAGE EXPECTED "DEV= device specification". (CIERR
1552)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
1553 MESSAGE INVALID DEVICE SPECIFICATION (CIWARN 1553)
CAUSE The device specified is not valid.
ACTION Specify a valid device.
1554 MESSAGE USE OF DEVICE CLASS IS INAPPROPRIATE FOR
INPUT FILES. (CIERR 1554)
CAUSE Same as the message.
ACTION Check the syntax and reenter the command.
1555 MESSAGE DIRECT ACCESS DEVICE MAY NOT BE SPECIFIED.
(CIERR 1555)
CAUSE Same as the message.
ACTION Check the syntax and reenter the command.
1556 MESSAGE "DEV=" PARAMETER REDUNDANTLY SPECIFIED, LAST
USED. (CIWARN 1556)
CAUSE The DEV parameter was specified more than once. The
system used the last value entered.
ACTION If you want a value other than that used by the system
reenter the command.
1580 MESSAGE SHOWDEV MAY HAVE ONLY ONE PARAMETER, THE
DEVICE NAME OR NUMBER. (CIWARN 1580)
CAUSE Both a device name and device number were specified with
this command.
ACTION Specify either a device name or device number but not
both.
1581 MESSAGE LOGICAL DEVICE NUMBER ! DOES NOT EXIST ON THE
SYSTEM. (CIERR 1581)
CAUSE The logical device number specified is not valid on this
system.
ACTION Specify a valid logical device number.
1582 MESSAGE CLASS NAME "!" IS INVALID, MORE THAN 8