MPE/iX Error Messages Manual Vol 1 (32650-90878)

128 Chapter2
Command Interpreter
(CIERR)
1520)
CAUSE The JOB parameter was specified more than once.
ACTION None.
1521 MESSAGE EXPECTED "=" AFTER JOB KEYWORD. (CIERR 1521)
CAUSE The = sign is a required part of the JOB keyword
specification.
ACTION Provide the = sign with the JOB keyword (JOB=).
1522 MESSAGE SHOWJOB INTERNAL ERROR, CREATE OBJECT FAILED
(CIERR 1522)
CAUSE The SHOWJOB command is trying to create an internal
object in order to copy the Job Master Table (JMAT). The
copy is a snapshot of the current jobs and sessions on the
system and is formatted by SHOWJOB as the command
output. The copy can require a large amount of disk space,
depending on the JMAT size, which is then released when
the command completes. This message will be generated if
the JMAT is large (many active jobs/sessions) and
insufficient disk space exists for the copy to be made.
ACTION Try the command again. If disk space shortage appears to
be the problem, either wait until some space becomes
available or create some free space by purging old files,etc.
If you still get this message, call your Hewlett-Packard
Representative.
1530 MESSAGE ONLY OUTPUT DEVICE FILES ARE APPROPRIATE WITH
SHOWOUT. (CIERR 1530)
CAUSE The device file specified is not an output device file.
ACTION Specify only output device files with the SHOWOUT
command.
1531 MESSAGE ONLY INPUT DEVICE FILES ARE APPROPRIATE WITH
SHOWIN. (CIERR 1531)
CAUSE The device file specified is not an input device file.
ACTION Specify only input device files with the SHOWIN
command.
1532 MESSAGE EXPECTED A FILE NUMBER BETWEEN 1 AND 9999999.
(CIERR 1532)
CAUSE The file number specified was not between 1 and 16383.
ACTION Specify a valid file number from between 1 and 16383.
1533 MESSAGE EXTRA PARAMETERS ARE INAPPROPRIATE, IGNORED.
(CIERR 1533)
CAUSE More parameters were specified than required. The extra