MPE/iX Error Messages Manual Vol 1 (32650-90878)

122 Chapter2
Command Interpreter
(CIERR)
ACTION If you want an INPRI value less than 13 specify the new
value.
1464 MESSAGE INPRI PREVIOUSLY SPECIFIED, HIPRI VALUE USED.
(CIWARN 1464)
CAUSE Same as message.
ACTION None; the message is for information only.
1465 MESSAGE OUTCLASS VALID FOR JOBS ONLY, IGNORED.
(CIWARN 1465)
CAUSE Same as message.
ACTION None; the message is for information only.
1466 MESSAGE INV. OUTCLASS-EXPECT CLASS NAME OR LDEV;
DEFAULT USED. (CIWARN 1466)
CAUSE Same as message.
ACTION None; the message is for information only.
1467 MESSAGE MUST HAVE ND CAP. TO SPECIFY OUTCLASS.
(CIWARN 1467)
CAUSE Same as message.
ACTION Ask the system manager to assign the ND capability to
your user.
1468 MESSAGE LOWEST OUTPRI IS 1, 1 USED. (CIWARN 1468)
CAUSE A value of less than 1 was specified for OUTPRI and the
system will default to the value of 1.
ACTION If you want an OUTPRI value greater than 1 specify the
new value.
1469 MESSAGE HIGHEST OUTPRI IS 13, 13 USED. (CIWARN 1469)
CAUSE A value of more than 13 was specified for OUTPRI and the
system will default to the value of 13.
ACTION If you want an OUTPRI value less than 13 specify the new
value.
1470 MESSAGE EXPECTED INT. BETWEEN 1 AND 127 FOR
NUMCOPIES. (CIWARN 1470)
CAUSE The value specified for NUMCOPIES was not with the
allowable range of 1 to 127.
ACTION Specify a value of between 1 and 127 for NUMCOPIES.
1471 MESSAGE 127 IS MAX. NUMBER OF COPIES, 127 USED.
(CIWARN 1471)
CAUSE The value specified for number of copies was more than
127 and the system defaults to 127.