Installation/Upgrade Procedures for SHAREPLEX

Installation/Update Procedures for NetBase for MPE
1-5
Step 2: Install the NetBase Shell
Note. After the installation of the shell has been completed, the system MUST be
shutdown and restarted.
Global installation of NetBase requires that NetBase modules be installed into the system libraries
located in
PUB.SYS. These libraries are SL.PUB.SYS, RTMSL.PUB.SYS and XL.PUB.SYS. Before
performing any installations to a system library, you should perform a complete backup of all
important data. In addition, you should have a current SLT prior to the install. The system should
be quiet, this means no active jobs or sessions, during the installation.
Global installation is accomplished via
NBINST.PUB.NETBASE, an auto-installation program. This
installation program requires the user to be
MANAGER.SYS, logged into the PUB group. NBINST is
run with an
INFO string depending on the product(s) being installed.
The following table lists the various installation options and when each is used.
Install Option Usage
INSTALL
Most installations.
INSTALL OMNIDEX
Required if using OMNIDEX 3.0 and NetBase NFA. If using this
option, there is an additional configuration step. Turn to the
“NetBase and Third Party Products” chapter for more information
on the OMNIDEX/NetBase interface.
INSTALL NOIMAGE
Used when installing NBSpool Plus only (without NetBase).
INSTALL NFS
Used when installing NFS Client only (without NetBase).