Installation/Upgrade Procedures for SHAREPLEX

SHAREPLEX
1-10
C> ADD 4
System Name........................ VIXEN
Startup Access (S/I/O/A/W)......... [A]
Node Name.......................... VIXEN.QUEST.COM
Node Connection Timeout............ [180]
SPOOL - Direction (N/E/I/B).. ..... [N] B
SPOOL - Allow incoming job streams. [N]
SPOOL - Enable Export Flow Control. [N]
SHADOW - Direction (N/E/I/B)....... [N] B
SHADOW - Export queue size......... [3172]
SHADOW - Import queue size......... [3172]
SHADOW - Post queue size........... [3172]
SHADOW - Initial Post Priority..... [DEFAULT]
SHADOW - Post Inactivity Timeout... [0]
SHADOW - Enable Post Logging....... [N]
SHADOW - Log all Post Transactions. [N]
SHADOW - Save Process Info on Post. [N]
SHADOW - Abort Post on Errors...... [N]
SHADOW - Buffered Exporting........ [Y]
SHADOW - Transfer mode only........ [N]
SHADOW - Transfer Single Queues.... [N]
SHADOW - Transfer ACK Frequency.... [0]
SHADOW - Post Directory Filename... [DEFAULT]
This procedure is repeated for each system in the network to be accessed by NetBase.
The
LIST command can be used to display the configured nodes.
_____
3.3 Check the configuration using the LIST NODES command in CONFIG.
C> LIST NODES
Node Sys name Line Type Startup Spool Shadow
3* FOX N A N N
4 VIXEN N A B B
Currently 2 Nodes are defined
The * designates the local node.