HP System Dictionary/XL General Reference Manual Vol 2 - Part 1 SDINIT (32256-90005)

C-147
Manager.
3702 MESSAGE No System Dictionary opened (SDERR 3702)
CAUSE An attempt was made to load definitions with no SystemDictionary opened.
ACTION Issue the SYSDIC command to open the System Dictionary, and thenload the definitions.
3703 MESSAGE Could not close the Dictionary/V database (SDERR 3703)
CAUSE DBClose TurboIMAGE/XL intrinsic call failed.
ACTION Notify the System Manager of the problem.
3704 MESSAGE Could not open the Dictionary/V database (SDERR 3704)
CAUSE DBOpen intrinsic call failed.
ACTION Act according to the additional error messages issued. If a serious problem is suspected, notify the System
Manager.
3705 MESSAGE No Dictionary/V database opened (SDERR 3705)
CAUSE An attempt was made to access the Dict/V dictionary with noactual dictionary opened.
ACTION Issue the DICT3000 command to open a Dict/V dictionary, and thenaccess it.
3706 MESSAGE SCOPE-OWNER and SENSITIVITY parm values conflict (SDERR 3706)
CAUSE When SCOPE-OWNER = RESPONSIBLE or IDENTITY-CREATE, SENSITIVITYcannot be PRIVATE.
See SDCONV manual for more explanation.
ACTION Either change SCOPE-OWNER to LOGON, or SENSITIVITY to MODIFY orREAD.
3710 MESSAGE Error while opening old SDLOG. Logging disabled (SDERR 3710)
CAUSE 1. The old SDLOG is being accessed by some other userexclusively.2. Some other error.
ACTION Since logging is disabled, and SDLOG is not opened at all, youare not required to take any action. However,
if the commandlogging is essential for you, exit the program immediately, takecare of the problem, and re-
enter SDCONV. If a system error issuspected, notify the System Manager.
3711 MESSAGE Error while creating new SDLOG. Logging disabled (SDERR 3711)
CAUSE Insufficient disc space.
ACTION Build a small file and equate SDLOG to it. Notify the SystemManager of the insufficient disc space.
CAUSE Some other error.
ACTION Since logging is disabled, and SDLOG is not opened at all, youare not required to take any action. However,
if the commandlogging is essential, exit the program, take care of theproblem, and reenter SDCONV. Fur-
ther, following actions aresuggested:Use a file equate to equate SDLOG to some other file and tryagain. If
a system error is suspected, notify the SystemManager.
3712 MESSAGE Error while opening old SDOUT. Report defaulting to $STDLIST (SDERR 3712)
CAUSE Old SDOUT could not be opened. The SDOUT report informationwill be output to $STDLIST upon termi-
nation of the program.
ACTION Since SDOUT report information is collected and reported to$STDLIST, you do not have to take any action.
However, if thereport information needs to be saved away in a disc file, exitthe program immediately, locate
and remedy the problem, and thenreinvoke the program.
3713 MESSAGE Error while creating new SDOUT. Report defaulting to $STDLIST (SDERR 3713)
CAUSE Insufficient disc space.