HP e3000/iX Network Planning and Configuration Guide (36922-90037)

68 Chapter4

Planning for Node Conﬁguration

Node Worksheet Information

Security class X.25 Virtual Circuit

Conﬁguration

For SVCs only. In the network

directory, the securityto be appliedfor

connection establishment with the

remote node.

Speed Point-to-Point Conﬁguration The line transmission speed is given

in bits per second. For direct connect

the value must be supported by the

cable. Values are 1200, 2400, 4800,

9600, 19200, 38400, 56000, and

64000. The default is 56000.

Type Point-to-Point Conﬁguration Enter DD (direct dial) if you always

want to call the same host over a dial

link. If you choose DD the remote host

does not have to be adjacent and other

nodes can be accessed through the

remote host. Enter SD if you want to

call more than one adjacent remote

node over a dial link without

reconﬁguring. If you choose SD, no

other remote nodes can be accessed

through the remote host; it is an end

point in the connection. Enter DC if

the link is a leased line, private line,

or other non-switched link.

Field Screen Description