HP e3000/iX Network Planning and Configuration Guide (36922-90037)

223
D NS X.25 Migration: NS 3000/V and
NS 3000/XL Release 1.X to iX
Release 2.0 or later
This Appendix tells how to use the NMMGRVER utility to migrate a
configuration file from any MPE V based node acting as an X.25 server
for NS 3000/XL based machines (including the NS X.25 3000/XL Server
product) to an NS 3000/iX node that will be running NS 3000/iX
release 2.0 or later. This appendix assumes that you want to move the
X.25 configuration from the MPE V-based X.25 server to an existing
NS 3000/XL node and then upgrade it to NS 3000/iX 2.0.
This appendix does not apply if the MPE V node you want to migrate
from is not acting as an X.25 server for NS 3000/XL based machines.
Refer to the following appendixes depending on which X.25 network
products you currently have:
• For migrating a node’s configuration file from NS 3000/XL releases
1.0, 1.1, or 1.2 to NS 3000/iX release 2.0 or later, refer to Appendix B,
“NS X.25 Migration: NS 3000/XL Releases 1.0, 1.1, or 1.2 to
NS 3000/iX Release 2.0 or Later.”
• For migrating a configuration file from a node running NS X.25
3000/V Link to a node that will be running NS 3000/iX release 2.0 or
later, refer to Appendix C, “NS X.25 Migration: NS 3000/V to
NS 3000/iX Release 2.0 or Later.” This appendix does not apply if the
MPE V node you want to migrate from is acting as an X.25 server for
NS 3000/XL based machines.
• For migrating a configuration file from a node running NS 3000/V
PAD to an NS 3000/iX node that will be running NS 3000/iX
release 2.0 or later, refer to Appendix E, “NS X.25 Migration:
NS 3000/V PAD Access to NS 3000/iX Release 2.0 or Later.”
This appendix also provides an overview of the differences between
networking functionality on an MPE V and an MPE/iX system you need
to consider for migration.