HP e3000/iX Network Planning and Configuration Guide (36922-90037)

137

8 Conﬁguring an X.25 Node

This chapter provides step-by-step instructions for conﬁguring X.25 iX

System Access for systems using PC-based network management. This

manual assumes that you are using the guided conﬁguration

capabilities of NMMGR.

Figure 8-1 shows the screen ﬂow for conﬁguring X.25 screens. Screens

unique to X.25 conﬁguration are indicated by bold boxed screens.

[FUNCTION] denotes the function key used at a screen to invoke the

next screen on the screen ﬂow.

Figure 8-1 X.25 Link Screen Flow