HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
397
Cause This warning indicates that the STATUS command found an error from the
last system boot relating to HP Stage/iX bootup routines. This usually
means that one or more errors were encountered when HP Stage/iX tried
to move files around while switching staging areas.
Action Read the HP Stage/iX log file, “/SYS/hpstage/current_log” (remember this
name is case-sensitive) to find the exact error(s). Contact your
Hewlett-Packard Response Center if you need assistance.
1099 Message Encountered an unexpected error: Subsys = value, Info = value
Cause STAGEMAN encountered an error that is not recognized by the HP
Stage/iX facility, and has no matching error message in the system
catalog. This normally indicates a problem within the HP Stage/iX
subsystem that should be reported to Hewlett-Packard.
Action Contact your Hewlett-Packard Response Center for assistance.
Message 1100 and 1101 not used.
1102 Message Attempted to add more than the maximum number of staging areas
allowed. (Max = ) (STAGEMAN 1102)
Cause The maximum number of staging areas supported by the HP Stage/iX
facility has been reached, so STAGEMAN cannot add another staging
area.
Action Delete one or more existing staging areas to make room, and re- execute
the command.
1103 Message File “name” does not exist in the Base. (STAGEMAN 1103)
Cause The file was staged with a file disposition of either REPLACE or DELETE,
which tells STAGEMAN that a version of the file should exist in the Base.
STAGEMAN reports this warning when it cannot find the file in the Base
at validation time.
Action None
1104 Message ADD file “name” exists in the Base. (STAGEMAN 1104)
Cause The file was staged with a file disposition of ADD, which tells
STAGEMAN that no version of the file should exist in the Base.
STAGEMAN reports this warning when it finds the file in the Base at
validation time.
Action None
1105 Message Failed to find the staging area in the Globals file. (STAGEMAN
1105)
Cause STAGEMAN failed to find an entry for the staging area in the HP
Stage/iX Globals file when it expected to find one. This indicates a
problem with the HP Stage/iX facility, and should be reported to
Hewlett-Packard.
Action Contact you Hewlett-Packard Response Center for assistance.
1106 Message Found a bad file disposition value for file “name”. (STAGEMAN 1106)