HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
385
Action Choose another staging area name. You may use the string “BASE” within
a staging area name (e.g., “Base_OS”).
1023 Message Staging area “name” is active. Can’t command. (STAGEMAN 1023)
Cause The user attempted a change operation on the active staging area. Since
the files belonging to the active staging area are in use, STAGEMAN does
not allow any changes to that staging area to avoid the possibility of
corrupting the environment and/or the system.
Action To make changes to an active staging area you must boot from the Base so
that the staging area is no longer active.
1024 Message Staging area “name” is set fornext boot. Can't command. (STAGEMAN
1024)
Cause The user attempted a change operation on a staging area that is set to be
used on the next system boot (i.e., a SET was done to that staging area).
Since critical changes have been made to the HP Stage/iX environment
based on the structure of that staging area, STAGEMAN does not allow
any changes to the staging area to avoid the possibility of corrupting the
environment and/or the system.
Action To make changes to the staging area you must do a SET back to the Base
(or another staging area), and execute the desired command(s). After the
changes are made, you may re-VALIDATE (if necessary), and SET to the
staging area again.
1025 Message Staging area “name” does not exist.Can't command. (STAGEMAN 1025)
Cause STAGEMAN does not recognize the staging area as part of the HP
Stage/iX environment.
Action Check your spelling on the staging area parameter. If the staging area
existed before and a DELETE was not done, the staging area may need to
be recovered (do a HELP on RECOVER for more information).
1026 Message Staging area “name” is already set for next boot. No action taken.
(STAGEMAN 1026)
Cause A SET command was already done to set this staging area to be used on
the next system boot, therefore no action from STAGEMAN was needed.
This warning is for information purposes only.
Action None
1027 Message The TO file name cannot reside under the HP Stage/iX Root
Directory. (STAGEMAN 1027)
Cause The user attempted to stage a file whose natural location was under the
HP Stage/iX Root Directory (/SYS/hpstage/). This action would potentially
cause problems at bootup time, so it is not allowed.
Action Did you really want to do this, or were you just fooling around?
1028 Message Staging area “name” already exists. Can’t command. (STAGEMAN 1028)
Cause A staging area that already exists in the HP Stage/iX environment was
provided as a parameter to a command that would create a new staging
area.