HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Warning Messages (INSTWARN)
378
Action • Follow the instructions on the screen and ensure the second volume
has been mounted before pressing [[return]] again to continue.
• Use DSTAT to verify that the second CD-ROM is mounted.
10 Message HPINSTAL is terminating on user's request. (INSTWARN #10)
Cause The user entered QUIT at the prompt to continue after switching the
CD-ROM volumes.
Action • Mount the first CD-ROM volume again and restart HPINSTAL.
• HPINSTAL may be started again from the beginning or the current
process may be resumed at the point of creating the CSLT.
11 Message Could not restructure PATCHAUD (INSTWARN #11)
Cause FCOPY of PATCHAUD to a fixed record format file failed.
Action If it is necessary to convert the PATCHAUD file to fixed, ASCII then use
the following commands:
: FILE PAUD;REC=-80,,F,ASCII
: FCOPY FROM=PATCHAUD;TO= PAUD;NEW;SUBSET Reply Y
: PURGE PATCHAUD
: RENAME PAUD,PATCHAUD
Message 12-19 Not used
20 Message Nonexistent product number. (INSTWARN #20)
Cause A bad product number was entered.
Action Reenter the correct product number.
21 Message Keyword incorrect. Retype your keyword. (INSTWARN #21)
Cause An invalid keyword was entered.
Action • Ensure the key entered matches the keyword certificate received from
Hewlett-Packard.
• Ensure that the product list entered is correct.
• Run HPINSTAL again from the beginning.
• Contact the Response Center for further assistance if required.
22 Message Exactly fourteen (14) characters must be entered. (INSTWARN
#22)
Cause An invalid keyword was entered.
Action • Ensure the key entered matches the keyword certificate received from
Hewlett-Packard.
• Ensure that the product list entered is correct.
• Run HPINSTAL again from the beginning.
• Contact the Response Center for further assistance if required.
23 Message 23 not used.
24 Message This product number is not part of the original list.
(INSTWARN #24)