HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Installer Error Messages (INSTERR)
360
Message 168-170 Not used
171 Message Error purging the OS SOM from TEMPNL. (INSTERR #171)
Cause The installer invoked the Link Editor to purge the OS SOM from the
library TEMPNL in preparation for replacing it with a patched OS SOM.
Action Document any error message text prior to the error.
Print file AUTOLOG.INSTALL.SYS to view detailed error from link
editor.
Check error message cause and action in the HP Link
Editor/iX Reference Manual.
Take appropriate corrective measures and run the installer again.
Contact the Response Center if further assistance is required.
172 Message Purge of Relinker option file failed. (INSTERR #172)
Cause Purge of a file with relinker options failed.
Action Document any error message text prior to the error.
Examine file for other accessors.
If file is being accessed, free up file.
Take appropriate corrective measures and run installer again.
Contact the Response Center if further assistance is required.
173 Message Error setting the SOMPATCH jcw: PATCHJCW. (INSTERR #173)
Cause The installer was attempting to set the SOMPATCH jcw: PATCHJCW to a
legal value prior to invoking SOMPATCH to apply a binary patch.
Action Document any error message text prior to the error.
Issue the command SHOWVAR to determine if the symbol table is
full.
Delete any user set variables or jcws.
Run the installer again.
Contact the Response Center if further assistance is required.
174 Message The installer failed to build the ASYSUTIL file. (INSTERR
#174)
Cause Build of the ASYSUTIL file failed.
Action Document any error message text prior to the error.
If on old ASYSUTIL file exists, then purge it.
Check for free disk space to build file. There are two methods for
obtaining additional disk space:
Use the ALTERVOL command in VOLUTIL to set the permanent
and transient space allocation assignments to 100% on all system
volumes except LDEV 1.
Store user files to tape and them purge them. Restore the files
from tape at the end of the installation.