HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Chapter 6
Finishing the Process
6.7 Performing the Final Reboot
153
The system boots from disk. After some activity the ISL prompt displays.
4. At the ISL prompt, enter:
ISL>START NORECOVERY
5. Confirm the date and time. If the date and time displayed are not correct, enter N, and enter the correct
date and time. If you do not respond within 15 seconds, the system continues.
MPE/iX launch facility
Initialize_genesis - Version: <<870204.1552>>
TUE, APR 19, 1994, 10:20:03 AM (y/n)? Y/N
[CDM] n n n n
Initialize genesis completed.
The system displays initialization and restore messages for 5 to 6 minutes.
During the start-up process, the system makes several configuration checks and may display warning
messages or error messages (for example, error messages referencing the SPUINFOP file or DCC error
messages). This is normal for system start-up and will not affect system operation.
6. At completion, it logs on as OPERATOR.SYS.
• Performing the Final Reboot completed. Go to the next section on your checklist.