HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Chapter 5
Modifying Your System
5.11 Securing the System
127
Remote Tasks CD-ROM Tasks
19. If you are preparing a CSLT tape on a central system for distribution to a remote system or if you are
modifying the remote system:
a. Purge the HPINSTFL file.
:PURGE HPINSTFL.INSTALL.SYS
It removes old audit trails, if they exist.
CAUTION Do not purge HPINSTFL if you are updating the local system (the system your are
currently logged on to). Also do not purge the HPINSTFL if you are installing additional
SUBSYS products.
b. Go to Step 20.
20. If you are performing a PowerPatch task, go to Step 21.
If you are not performing a PowerPatch task, go to the next section on your checklist.
PowerPatch Tasks
21. Restore the AUTOINST file set and its dependencies, except for checklists L and M which included this step
in section 5.7.
a. Log onto the INSTALL group, and enter the following at the system prompt:
:HELLO MANAGER.SYS,INSTALL;HIPRI
:FILE PPT;DEV=TAPE
b. Mount the PowerPatch tape and put the tape drive online. Issue the following command to restore the
files:
:RUN STORE.PUB.SYS;INFO="RESTORE *PPT;A@,F@;SHOW;DEV=1"
c. Dismount the tape when the restore is complete.
• Securing the System completed. Go to the next section on your checklist.