HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Chapter 5
Modifying Your System
5.4 Starting the System
112
--------- ---------------------------------- ----- ----- ----- ----- -----
8 I/O Adapter CH 580H BH 15 1
8/63 GSC+ Port 7H 501H CH 1 3
10 I/O Adapter CH 580H BH 15 1
10/4 Upper Bus Converter 7H 500H CH 0 0
10/4/0 HP-PB LAN/Console 2H 5H 60H 0 1
10/4/4 HP-PB Fast Wide SCSI 4H 4H 3BH 0 0
10/4/4.2.0 SEAGATE ST318275LC - - - - HP00
10/4/4.3.0 SEAGATE ST39175LC - - - - HP00
10/4/4.4.0 SEAGATE ST39175LC - - - - HP00
10/4/8 HP-PB SCSI 4H 4H 39H 0 0
10/4/8.0.0 SEAGATEST32550N disk drive - - - - HP10
10/4/8.1.0 SEAGATE ST34572WC - - - - HP01
10/4/8.2.0 SEAGATE ST32272WC - - - - HP01
10/4/9 HP-PB Centronics 5H 4H 3AH 0 0
10/4/20 HP-PB SCSI 4H 5H 39H 0 0
10/4/20.0.0 HPC1533A/C1530B tape drive - - - - AN04
10/4/20.1.0 HPC1533A/C1530B tape drive - - - - AN04
10/4/24 HP-PB Fast Wide SCSI 4H 5H 3BH 0 0
10/4/24.3.0 SEAGATE ST34371W disk drive - - - - HPM2
10/4/24.4.0 SEAGATE ST34371W disk drive - - - - HPM2
10/4/24.5.0 Quantum XP34361WD - - - - HP10
10/4/24.6.0 SEAGATE ST34371W disk drive - - - - HPM4
10/4/60 HP-PB Port 7H 103H CH 0 0
10/16 Upper Bus Converter 7H 500H CH 0 0
10/16/60 HP-PB Port 7H 103H CH 0 0
10/63 GSC+ Port 7H 501H CH 1 3
32 MoHawk Processor 0H 590H 4H 0 0
34 MoHawk Processor 0H 590H 4H 0 0
36 MoHawk Processor 0H 590H 4H 0 0
38 MoHawk Processor 0H 590H 4H 0 0
49 Memory (1024 M bytes) 1H 32H 9H 0 0
Extender 0
slot 0A/0B bank 3: 64MB
bank 8: 64MB
slot 1A/1B bank 7: 64MB
bank 12: 64MB
slot 2A/2B bank 4: 64MB
bank 15: 64MB
slot 3A/3B bank 0: 64MB
bank 11: 64MB
slot 4A/4B bank 5: 64MB
bank 14: 64MB
slot 5A/5B bank 1: 64MB
bank 10: 64MB
slot 6A/6B bank 2: 64MB
bank 9: 64MB
slot 7A/7B bank 6: 64MB
bank 13: 64MB
RUN COMPLETED.
• Listing the System Configuration completed. Go to the next section on your checklist.
5.4 Starting the System
When the update is complete, autoboot begins. Perform the following steps to ensure the system is up and
running.