HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)

Appendix H 453
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
(STAGEMAN 1107)
Cause STAGEMAN found an unexpected file error action value
for the file (the error action should be WARN or IGNORE).
This indicates a problem with the HP Stage/iX facility, and
should be reported to Hewlett-Packard.
Action Contact you Hewlett-Packard Response Center for
assistance.
1108 Message Failed to open file “name” in the staging area.
(STAGEMAN 1108)
Cause STAGEMAN received a bad status from the HPFOPEN
intrinsic during an attempt to open the file. There should
be a file system error message associated with this one
that explains why.
Action Determine why the file could not be opened, correct the
problem, then re-execute the command.
1109 Message Could not find file “name” in the staging area.
(STAGEMAN 1109)
Cause STAGEMAN expected the file to exist but could not find it.
Action Determine why the file does not exist, correct the problem,
then re-execute the command.
1110 Message Failed to open file “name” in the staging area for purging.
(STAGEMAN 1110)
Cause STAGEMAN received a bad status from the HPFOPEN
intrinsic during an attempt to open the file. There should
be a file system error message associated with this one
that explains why.
Action Determine why the file could not be opened, correct the
problem, then re-execute the command.
1111 Message Failed to purge file “name” in the staging area.
(STAGEMAN 1111)
Cause STAGEMAN received a bad status from the FCLOSE
intrinsic while attempting the purge the file from the
staging area (FCLOSE ,PURGE option).
Action Determine why the FCLOSE failed, correct the problem,
then re- execute the command.
1112 Message Failed to close file “name” in the staging area.
(STAGEMAN 1112)
Cause STAGEMAN received a bad status from the FCLOSE
intrinsic while attempting the close the file.
Action Determine why the FCLOSE failed, correct the problem,
then re-execute the command.