HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)

Chapter 2 43

Task Checklists

Checklist H. Update with CD-ROM

Use this task checklist if your source material is on CD-ROM and you are using a CSLT

tape to:

• Update your system software version level

• Update your system software version level and apply PowerPatch patches

NOTE

You cannot apply Reactive patches at the same time you are updating the

system. You must apply Reactive patches after you update the system. To

apply Reactive patches (after you update the system) refer to the Checklist A,

“Manage Patches,” or Checklist B, “Manage Patches by Staging Area.”

Print a copy of this checklist for each system that you are updating. Read and perform the

steps only in the following sections:

Begin Preparation Tasks.

Does not require exclusive access to the system.

Chapter 3 , “Planning for Your Task.”

— 3.1 Verifying Required Materials

— 3.2 General Planning Tasks

— 3.3 CD-ROM Planning Tasks

— 3.4 Checking Tape Media

— 3.5 Checking Peripherals

— 3.6 Estimating Disk Space

Record contiguous disk space:

Record non-contiguous disk space:

Chapter 4 , “Preparing Your System.”

— 4.3 Preparing to Run HPINSTAL

Record CD

v.uu.ff

version level:

— 4.6 Creating the CSLT using HPINSTAL

Record manually installed products:

— 4.12 Reserving Disk Space for CD-ROM Tasks

Record contiguous disk space:

Record non-contiguous disk space:

Preparation Tasks completed.

Schedule downtime for exclusive access.

If you are not applying this update to a master system, and instead are only creating a

CSLT on a master system to apply to a remote system, you can now proceed to the

Checklist I, “Modify Remote System.”