HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)

412 AppendixH
Error Messages and Warnings
Installer Error Messages (INSTERR)
• Examine file for accessors other than the installer.
• If file is being accessed, free up file.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
193 Message Error encountered while redirecting input to
SYSPROGF. (INSTERR #193)
Cause The installer attempted to issue the command:
:LISTF MISCP.@.SYS,6; SYSPROGF
Action • Document any error message text prior to the error.
• Purge the file SYSPROGF.
• Reset the file equation SYSPROGF.
• Run the installer again.
• Contact the Response Center if further assistance is
required
Message 194-196 Not used
197 Message Error setting IODFDATA.PUB.SYS file equation.
(INSTERR #197)
Cause Setting the IODFDATA.PUB.SYS file equation required
by the installer and SYSGEN failed.
Action • The FILE Command Table is possibly full.
• Check if any further file commands can be entered with
the FILE command.
• RESET any USER file equations.
• Take appropriate corrective measures and run the
installer again. The installer will reissue any needed
file equations.
• Contact the Response Center if further assistance is
required.
198 Message Error resetting STORECAT.PUB.SYS file equation.
(INSTERR #198)
Cause The installer encountered an error resetting the file
equation: STORECAT.PUB.SYS
Action • Document any error message text prior to the error.
• RESET STORECAT.PUB.SYS
• Run the installer again.