HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)

226 AppendixD
Backdating Your System
Performing the Backdate
If you modified your configuration after updating to the latest Release, you must
reenter these modifications at this point. This includes I/O changes, and any
modifications made to logging events, system files (SYSFILE), or miscellaneous (MISC)
items.
sysgen> KEEP
Purge old config? YES
sysgen> EXIT
If you do not have a backup of your old CONFIG.SYS group, modify your configuration
manually as described in Step 2. Otherwise, skip to Step 3.
2. Modify or restore configuration files.
a. Type at the prompt.
:sysgen
sysgen>io
io>lpath
b. Record configuration and compare to the configuration listed by ODE. Refer to
“Listing System Configuration” earlier in this appendix.
c. Change the configuration to match the ODE listing.
d. Save changes.
io>HOLD
io>EXIT
sysgen>KEEP CONFIG
purge old configuration? YES
sysgen>EXIT
A warning message displays regarding nmconfig. Ignore it.
3. Shutdown the system.
CTRL-A
=SHUTDOWN
4. Reset the system.
As appropriate to your system, do either Step a, b, or c:
a. For HP e3000 Series 99X:
CTRL-B
CM>SP
SP>RS
Enter Y to HARD BOOT the computer system.
b. For HP e3000 N-Class, A-Class
CTRL-B
GSP>RS
c. For all other systems:
CTRL-B
CM>RS