HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

594 AppendixG
TERMINAL INFORMATION
SUPPORTED TERMINALS AND FEATURES
SUPPORTED TERMINALS AND FEATURES
VPLUS can be used with the following terminals:
Applicable special features of these terminals are shown in the table above and are
described below.
Termtypes
As a user of an HP 3000 system, you may choose to specify a termtype when you log onto
MPE; for example,
:HELLO username.acctname ;term=nn
However, VPLUS only supports a subset of the available termtypes . They are termtypes
10, 12, 14, and 24.
A
termtype that is not supported by VPLUS may be:
• Rejected as an error if VPLUS knows that it cannot continue, or
• Mapped to a supported
termtype if this will allow VPLUS to continue.
When VPLUS maps an unsupported
termtype to one that is supported, the terminal
driver is reconfigured to the original
termtype when VPLUS closes the terminal. Finally,
VPLUS defers to the Workstation Configurator when editing
termtype if that facility is
available.
Modified Data Tag
You do not have to take any action to utilize this feature. Only the fields which have been
modified are transmitted to the computer. This feature is supported on the following
terminals:
• HP 150*
• HP 2382A
• HP 2392A
• HP 2393A
• HP 2394A
• HP 2397A
• HP 2622A
• HP 2623A
• HP 2624A
• HP 2624B
• HP 2625A
• HP 2626A
• HP 2627A
• HP 2628A
• HP 2640B
• HP 2641A
• HP 2642A
• HP 2644A
• HP 2645A
• HP 2647F**
• HP 2648A
• HP 3075A
• HP 3076A
• HP 3081A
* HP 150 is obsolete and not supported for this release.
** HP2647F opt series 6x/7x consoles are not compatible.
HP 150 (obsolete and
not supported)
HP 2393A
HP 2394A
HP 2397A
HP 2624A/B
HP 2625A
HP 2628A