HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

Appendix B 547
VPLUS Error Messages
REFSPEC Messages
127
Output field length is
improperly aligned on screen.
Enter output field length at tab position 7.
129
Output field starting offset
can only have up to 5 digits.
Starting column of output field must not exceed
5 digits.
130
Output field starting offset
is improperly5 digits.
Starting column of output field must not exceed
5 digits.
131
Start record indicator is not
in its field.
Enter start-of-record marker at tab position 8.
132
Start record indicator should
be a single character.
A start-of-record marker is limited to 1
character.
133
Column numbering starts with
1.
The starting column in the output record cannot
be zero.
134
This is not a legal system
constant.
Use one of the legal constants: $CR, $LF, $GS,
$US, $RS, or $ followed by the numeric
equivalent of an ASCII character. Other
constants may not start with a $.
135
Output field length must be a
positive integer greater than
0.
Output length cannot be zero or a negative
number.
136
Output field starting column
causes overlapping fields.
The starting column for this field falls within
the bounds of a previous field. Enter a higher
value.
137
A single literal cannot have
more than 75 characters.
Literal must fit on a single line of OUTPUT
RECORD menu and must not overwrite the
start-of-record marker position.
138
Literal must not continue
beyond column 75.
One line of OUTPUT RECORD menu is limited
to columns 1-75.
139
This is not a field. No
character may appear here.
140
Only literal, ASCII constant
or system constant expected
here.
141
Digit must follow sign.
142
Value for ASCII character
must be between 0 and 127.
The numeric equivalent of an ASCII character
may be only 0-127.
143
Field name must start with
char. No embedded blanks
allowed.
First character of field name must be
alphabetic; field name may not have embedded
blanks.
144
Record size must have a
value.
Record size on globals menu is a required field.
User must give maximum size of output record.
Error Message Cause/Action