HP Data Entry and Forms Management System (VPLUS) Reference Manual (32209-90024)

Chapter 4 137

Advanced Forms Design

Processing Speciﬁcations For Conﬁguration

You can use the processing speciﬁcations for conﬁguration to specify local editing to be

done on the HP 2394A and HP 2624A/B terminal, and to specify the input device and

prompting lights for use on the data capture devices.

These statements may only be used in the conﬁguration phase of ﬁeld processing, and

must have the CONFIG heading in the processing speciﬁcation area of the Field Menu.

NOTE

VPLUS edit processing speciﬁcations and terminal edit processing

statements are separate and are not checked for compatibility. There will be

no check to see that the designer has speciﬁed a terminal local edit

(DEC_TYPE_EUR, DEC_TYPE_US) in the conﬁguration phase which is

consistent with the language-dependent decimal indicator for the native

language speciﬁed in the forms ﬁle. For more information on Native

Language Support see Section 8.