HP A5150A PCI Dual Port Ultra2 SCSI Host Bus Adapter

Troubleshooting
Checking SCSI Bus Compatibility
Chapter 3 45
Displaying SCSI IDs
To use the SCSI command to display the initiator (SCSI) IDs for an
adapter, follow this syntax:
SCSI init bus_number slot_number
where
bus_number Specifies the number of the bus the adapter is installed
on.
slot_number Specifies the number of the slot the adapter is in.
For example:
• To display the SCSI ID for the adapter on bus 5 slot 2, issue this
command:
SCSI init 5 2
The output could look something like this:
PCI device /5.2 = 7
• To list the SCSI IDs for all bus and slot numbers, issue this command:
SCSI init