High Availability FailOver/iX Manual (32650-90911)

Configuration

Validation Errors Displayed

Troubleshooting a Validation Error

If DOHA returns an error state, check Appendix B, "Error Messages". Double

check for SYSGEN configuration errors or HAFO configuration errors.

If the Ldev, primary path, or alternate path needs to be changed, delete the

configured Ldev using

DELCONF

, add the Ldev back in using

ADDCONF

, do a hold

and keep, and then reboot the system.

Execute an

ADDCONF

command, hold and keep, and execute the

DOHA

command.

Validation Errors Displayed

Validation errors will be displayed after a HAFO event has occurred.

If a HAFO event has occurred, there will be errors displayed upon the issuance

of the

DOHA

command. HAFO configuration commands should only be issued

when there are no broken paths and all HAFO Ldevs are operating on their

primary paths.

WARNING

As mentioned previously

DOHA

should not be attempted when you know you

have “broken” primary or alternate paths.