Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Configuring Serial Devices (for Host-Based Management)

Modify the Network Management Configuration File

Chapter 5

sysgen> PERMYES ON

sysgen> BA CONFIG

sysgen> SY

** SYSFILE configurator commands **

aauto (aa) aboot (ab) acmsl (ac) asprog (as)

cmsl (cm) dauto (da) dboot (db) dcmsl (dc)

dsprog (ds) lcmsl (lc) rauto (ra) rboot (rb)

rcat (rc) rcmsl (rcm) rdcc (rd) ripl (ri)

rnmlib (rn) rsprog (rs) show (sh)

clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho)

sysfile> RDCC

**note** Retrieving NMMGR configuration data...

sysfile> HO

sysfile> EX

sysgen> KE

keeping to group CONFIG.SYS

Purge old configuration (yes/no)?Automatic yes

** configuration files successfully saved **

sysgen> EX

Cross-validation with SYSGEN was successful.

Copying validated configuration file to backup file, please wait ***

3. After successful validation and cross-validation, and if the file in use is

NMCONFIG.PUB.SYS, the following prompt will appear:

Do you want DTS changes to be become active now (Y/N)?

Y = all changes made take effect now

N = all changes made will take effect upon next dynamic

configuration or system boot

H = help