Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Configuring Serial Devices (for Host-Based Management)
Chapter 5
67
5 Configuring Serial Devices (for
Host-Based Management)
This chapter will use the configuration information that was collected on the worksheets
in Chapter 2, “Preparing to Configure DTCs.”
NOTE If you use OpenView DTC Manager to manage your DTCs, refer to Chapter 6,
“Configuring Serial Devices (for PC-Based Management),” instead of this chapter.
NOTE If you are configuring X.25 networking capabilities on a HP e3000 Series 900 computer
using host-based network management, use Configuring and Managing Host-Based
X.25 Links instead of this manual to configure DTCs and DTC connections.