Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Dynamic Configuration and DTS Shutdown/Restart

DTS Shutdown

Chapter 4

• DTS shutdown operation specified:

:DTCCNTRL func=shutdown

or to invoke the “forced” option:

:DTCCNTRL func=shutdown, forced=y

CAUTION When the “forced” option is invoked, then all sessions logged on to TIO devices will be

aborted and all spooled TIO printers will be stopped.

NOTE To dynamically configure DTS changes, refer to the “Dynamic Configuration” section

earlier in this chapter. To automatically add/configure a host-based managed DTC to

DTS without needing to specify detailed configuration information such as DTC

cards/boards and ldevs, refer to Chapter 3, “Automatic Configuration of DTCs.” To

manage/dynamically configure host-based X.25 links, refer to the Configuring and

Managing Host-Based X.25 Links manual.

For help on these topics, select 7 at the prompt below.

Select one of the numbers above corresponding to the desired

operation: 4