Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Dynamic Configuration and DTS Shutdown/Restart
Dynamic Configuration
Chapter 4
57
Change AFCP/management timers You may also use TermDSM to
reset the DTC (see Troubleshooting
Terminal, Printer, and Serial
Device Connections for more
information)
Change SNMP MIB data
Change SNMP trap destination
Change from host-based TIO to host-based X.25 1) Use DTCCNTRL to
shutdown/restart DTS (see
Chapters 5/6, step 9, for more
information)
Change DTC LAN address 2) Reboot DTC
Change DTC name You may also use TermDSM to
reset the DTC (see Troubleshooting
Terminal, Printer, and Serial
Device Connections for more
information)
Change DTC node name
Change from PC-based to host-based or vice
versa
Change NLIO from Y to N in terminal profile
Change initially spooled in printer profile
Change HP e3000 characteristics:
– node name
– link name
– physical path of LANIC
Add X.25 card to DTC when none previously
existed
Table 4-1 Dynamically Configurable Tasks (Continued)
Task
Action Required for Change to
Become Active