Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Preparing to Configure DTCs
Configuring With NMMGR
Chapter 2
40
NOTE In addition to the DTS subsystem, NMMGR is used to configure other network
subsystems on the HP e3000 Series 900, such as NS (Network Services), IBM, and OSI.
NMMGR provides many functions and utilities that are beyond the scope of this manual.
Refer to Using the Node Management Services for detailed information on NMMGR.
Figure 2-1 NMMGR DTS/DTC Screen Flow
Open Config/
Directory File screen
Main Screen
Host Configuration
screen
DTC Configuration
Selection screen
Validate Link/DTS and cross
validate with SYSGEN.
[Open
Config]
[Go To
DTS]
[Go To
DTC]
NS
Configuation
OSI Main
menu
HP-IBM
Configuration
[Go to
NS]
[Go To
OSI]
[Go To
IBM]
DTC 16iX
Config
DTC 16MX/
RX Config
DTC 16
Config
DTC 48
Config
DTC 72
Config
[Go To
DTC48]
[Go To
DTC16]
[Go To
16MX/RX]
[Go To
16iX]
Ports
Configuation
Async Card
Configuation
PAD Device
Configuation
[Card
Config]
[Config
Ports]
[Validate
Link/DTS]
UPS
Port
User
Port
Profile
Selection
Term/Printe
r
/PAD Profile
Switching
Configuration
Additional
Class Names
[Go To
Usr/UPS]
[Go To
UPS]
[Go To
Profiles]
[Add/Modify
Profile]
[Go To
Swtich]
[Go To
Classes]
Notes: All screens have a
[Prior
Screen]
key that will take you
back to the screen you visited
before the current screen.
Not all the screens in the DTS
subsystem are shown.
[Go To
DTC72]
DTC Automatic
Configuration
[Go T
o
Usr]
Launch DTS Dynamic
Confi
g
uration
[Card
Config]
‘Y’
[ENTER]