Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)
Error Messages
DTCCNTRL Error Messages
Appendix E
238
Cause: The DTCCNTRL command was issued at a time when another user had exclusive
access to the DTC (for example, TermDSM was running).
Action: Either reissue the DTCCNTRL command using the FORCED option to force access
to the DTC or wait until the DTC is no longer being exclusively accessed.
CTLERR 08 Non-existing DTC.
Cause: A DTCCNTRL command was issued for a DTC that is not configured for the host
system.
Action: Reissue the command with a correct DTC name specified in the DTC parameter.
CTLERR 09 Invalid card number.
Cause: A DTCCNTRL command was issued with an out-of-range card number specified in
the CARD parameter.
Action: Reenter the command with a valid DTC card number. For a DTC 16, the card
number must be 2. For a DTC 48, the card number must be between 1 and 5.
CTLERR 10 Stop PAD first.
Cause: An attempt was made to stop X.25 services prior to PAD services being stopped.
PAD services must be stopped first.
Action: Issue a DTCCNTRL command with a function of STOPBOTH to stop both X.25 and
PAD services.
Or
Issue a DTCCNTRL command with a function of STOPPADSUP, followed by a second
DTCCNTRL command with a function of STOPX25.
CTLERR 11 PAD switching list download failed.
Cause: An attempt was made to reconfigure PAD switching list values using the RC
function of DTCCNTRL. A problem occurred with the DTC while the PAD support values
were being downloaded.
Action: Check the DTC. Correct any problems then reenter the DTCCNTRL command
with FUNC=RC to download the reconfigured PAD switching list values.
CTLERR 12 PAD incoming security download failed.
Cause: An attempt was made to reconfigure incoming PAD security values for the DTC
using the RC function of DTCCNTRL. A problem occurred with the DTC while the new
configuration values were being downloaded.
Action: Check the DTC. Correct any problems then reenter the DTCCNTRL command
with FUNC=RC to download the reconfigured incoming PAD security values.
CTLERR 13 PAD access download failed.
Cause: An attempt was made to reconfigure PAD access using the RC function of
DTCCNTRL. A problem occurred with the DTC while PAD access values were being
downloaded.
Action: Check the DTC. Correct any problems then reenter the DTCCNTRL command
with FUNC=RC to download the reconfigured PAD access values.
CTLERR 14 DTC Global Data configuration download failed.