Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Migrating from Previous Releases
Migrating your Configuration to Host-Based Management
Appendix B
196
What the Migration Process Can/Cannot Do
The Migration process will be able to migrate the following portions of the DTC’s
configurations from the OpenView DTC Manager PC to DTCs configured on the
HPe3000 host.
• The following DTC types are migrated: DTC16, DTC48, DTC16iX, DTC16MX,
DTC72MX.
• All Global LAN configuration parameters will be migrated to the Host.
• All supported cards will be configured as the proper type and in the proper slots.
• The port group configuration of the DTC16MX and DTC72MX are maintained.
• All TIO ports and PAD devices will be configured as the same type as configured on
the PC. (terminal/printer/host, padterm/padprint).
• All Terminal ports that aren’t configured with an ldev on the host will configure as a
non-nailed TIO port.
• All of the following X.25 and PAD tables will be migrated intact.
— Level 1 & 2 and Level 3 data
— System to System Switching Table
— System to System LUG Table
— DTC PAD Switching Table
— PAD Device Access Table
— PAD Incoming Security Table
• What will not be migrated:
— The DTC Security lists: Node Names List; Define Access List
— Unique TIO port and PAD device parameters will not be maintained. (See below)
— TAC because it is long out of support and all functions have viable alternatives.
Table B-2 Patch IDs for MPE/iX Release 7. 5
Patch ID Product Name Version
NMSHD35A Node Management Services
32098-20014
B.00.13
NMCHD36A Node Management Configurator
32098-20016
B.07.06
DTSHD37A Terminal I/O 32022C C.05.01
TSMHD38A TermDSM C.05.01
DCCHD39A DCC/Validation C.06.00.100
ODMHD45A Open View DTC Manager A1440E00