Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Using NMMGR in Maintenance Mode
SUMMARYCONF
Appendix A
191
PORT [ dtcname [ card [ port ]]] Displays the configuration for all configured ports, all
ports on a specified DTC, all ports on a specified DTC and card, or for a
specific DTC, card, and port.
PROFILE
[
profile
] Displays the configuration for all profiles or for a specified profile.
X.25 CARD [
dtcname [ card# [ ,option ]]] Displays the information about the Host
Based X.25 Card configuration. The option may be one of:
LEVEL12 Displays the level 1 and 2 configuration.
LEVEL3 Displays the level 3 configuration miscellaneous configuration data.
SYS Displays the System to System Local User Group data.
SYSSWTH Displays the System to System Switching data.
PAD Displays the PAD Nailed devices data.
PADSWTH Displays the PAD Switching data.
SEC Displays the PAD Security data.
Example To display the summary report for NETXPORT:
NMMGR>SUMMARYCONF NETXPORT
To display the summary report for profiles defined in the DTS subsystem:
NMMGR>SUMMARYCONF DTS,PROFILE
Or:
NMMGR>SUMMARYCONF DTS
DTS Summary>PROFILE
To display the summary report for an X.25 System to System table on a DTC card:
DTS Summary>X25CARD WAR2 2 SYSSWTH
System to System Switching Table:
DTC Name: WAR2 Card number: 2
...
DTS Summary>