Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Using NMMGR in Maintenance Mode
SUMMARYCONF
Appendix A
190
SUMMARYCONF
Prints a summary report for one or more communications subsystems.
Syntax SUMMARYCONF subsystem[, subsystem[, ...]]
Parameters subsystem The name of the subsystem(s) for which the report will be generated. If
more than one subsystem is entered, a report will be printed for each
subsystem in the order given. If ALL is entered, a report will be
printed for every subsystem. Valid entries are ALL, DTS, NETXPORT,
SNANODE, NRJE, IMF, DHCF, APPC, and RJE.
Description SUMMARYCONF displays a summary report for a particular subsystem. This command is
identical to the Print Summary function in the NMMGR Output Configuration screen.
Output is directed to the file defined in the file equation FORMLIST. If FORMLIST is not
defined, output is sent to $STDLIST.
When you use SUMMARYCONF to print a summary report for the datacommunications and
terminal subsystem (DTS), you can also specify a summary option to designate
additional items in the DTS subsystem you wish to have reported. You do so in one of two
ways. The first way is to enter the option on the same line as the command. For example:
SUMMARYCONF DTS,LINK
will cause a report to be generated for the DTS link configuration. You can use this
method regardless of whether you entered maintenance mode from screen mode you are
running a job to generate output.
You can use the second way to specify a summary option for the DTS subsystem only if
you have entered maintenance mode from screen mode. This method is to enter
SUMMARYCONF DTS at the NMMGR maintenance mode prompt, with no option specified.
A new prompt will appear, as follows:
DTS Summary>
You can enter the DTS print option at this prompt. If you do not want to generate any
additional DTS reports, enter
E[XIT]
at the prompt. You will be returned to the
maintenance mode prompt.
The following DTS print summary options are available:
ALL Displays all DTS configuration information.
DTC[
dtcname ] Displays the configuration for all DTCs or for the DTC whose name is
specified in dtcname.
DTS Displays the DTS subsystem configuration parameters.
E[XIT] Leaves DTS Summary and returns you to the maintenance mode
prompt.
HELP Displays the available DTS summary options.
LDEV
[ldev[/ldev]] Displays the configuration for all ldevs (logical devices), a single ldev,
or a range of ldevs.
LINK Displays the link configuration for the DTS.