Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Using NMMGR in Maintenance Mode
Maintenance Mode Commands
Appendix A
188
OPENCONF OPENCONF fileref Opens a nodal
configuration file and
makes it the current
configuration file.
OPENDIR OPENDIR fileref Opens a network
directory file and
makes it the current
directory.
PAGECONF PAGECONF pageno Sets the page number
for multipage data
screens.
PASSWORD PASSWORD
[password]
Sets the password.
Validates the
NETXPORT
subsystem
configuration.
Changes the
password to allow
write access on the
OPEN screen.
PATHCONF PATHCONF[=]path Sets the current path
in the current
configuration file.
PURGECONF PURGECONF
[pathname]
Deletes the subtrees
of records from the
configuration file.
PURGELDEV PURGELDEV
{dtcname}
{dtc-nodename}
{station-address}
{filename} Purges LDEVs from
the DTC card.
PURGELU PURGELU
SNAnodename
[filename]
Purges LUs from the
SNA node transport
screen.
PURGENI PURGENI [niname] Purges a network
interface from the
configuration file and
performs cleanup.
PURGEVC PURGEVC [filename] Deletes a virtual
circuit address key
from the network
directory and the
configuration file.
Table A-1 NMMGR Maintenance Mode Commands (Continued)
Command Syntax Action