Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Terminal and Printer Profiles
PAD Terminal Profile (Host-Based)
Chapter 7
129
last parameter set to 0. The four parameters will also be ignored for
connections made through public PADs because the connections are
made to non-nailed ldevs.
Device class names Device classes provide a means of accessing devices associated
with a profile. Each device class name is up to eight alphanumeric
characters beginning with a letter.
Up to 450 device class names may be used for a printer profile; the
total number of supported, configured device classes defined in all
profiles is 2000. Use the
[Go To CLASSES]
key to go to an Additional
Device Class Names screen for entering additional device class names.
NOTE If you are changing profile characteristics, you can see which ldevs and
DTCs will be affected by the change by pressing the
[Assoc Ldevs]
function key on the profile screen corresponding to the profile you are
changing. After pressing this key, you will see a list of all ldevs using
this profile in the DTCs configured in DTS.