Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Terminal and Printer Profiles
Terminal Profile Screen (Host-Based)
Chapter 7
113
Terminal Profile Screen (Host-Based)
The Terminal Profile screen is used to define characteristics associated with a terminal
profile. Figure 7-2 shows a Terminal Profile screen for host-based management. The
PC-based Terminal Profile screen varies slightly, see Figure 7-4, Terminal Profile screen
(PC-Based).
Figure 7-2 Terminal Profile Screen (Host-Based)
Review the profile settings on the screen. Use the
[Tab]
key to move from field to field.
Make changes as needed by typing over the current values. When you have made the
desired changes, press the
[Save Data]
key. Refer to the “Fields” subsections for detailed
information about each field on the screen.
Press the
[Prior Screen]
key to return to the Profile Selection screen or Press the
[Go To
Switch]
key to go to the Terminal Switching Configuration Screen.
Fields Terminal type The terminal type associated with the profile. Three terminal types are
supplied with MPE/iX: terminal type 10, 18 and 24. See Terminal
Types earlier in this chapter.