Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

94 Chapter6
Configuring Serial Devices (for PC-Based Management)
Modify the Network Management Configuration File
Modify the Network Management
Configuration File
Use NMMGR to enter asynchronous device connection information into
the Network Management ConfigurationFileNMCONFIG.PUB.SYS. The
procedure for updating the configuration file follows.
Step 1. Begin the Configuration Process
To run NMMGR, enter the following command at the MPE/iX prompt
and then press the
[Return] key.
NMMGR.PUB.SYS
NOTE You must be logged on to the SYS account to run NMMGR.