Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

28 Chapter1
Introduction
Typical Network Configurations
Multi-System Access
Figure 1-5 shows a sample network configuration. The terminals
connected to DTC 1 are configured so that they are able to establish
connections to either System A or System B through the DTC Switching
User Interface. Output devices connected to DTC 1, such as serial
printers or plotters, are configured so that they can be opened using the
software from either host. Note the presence of the OpenView Windows
Workstation on the same LAN with the computers and DTC 1.
Figure 1-5 DTC Switching