Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Appendix A 207
Using NMMGR in Maintenance Mode
Maintenance Mode Commands
PASSWORD
PASSWORD [password] Sets the password.
Validates the
NETXPORT
subsystem
configuration.
Changes the
password to allow
write access on the
OPEN screen.
PATHCONF
PATHCONF[=]path Sets the current
path in the current
configuration file.
PURGECONF
PURGECONF [pathname] Deletes the subtrees
of records from the
configuration file.
PURGELDEV
PURGELDEV
{dtcname}
{dtc-nodename}
{station-address}
[filename]
Purges LDEVs from
the DTC card.
PURGELU
PURGELU SNAnodename [filename] PurgesLUsfromthe
SNA node transport
screen.
PURGENI
PURGENI [niname] Purges a network
interface from the
configuration file
and performs
cleanup.
PURGEVC
PURGEVC [filename] Deletes a virtual
circuit address key
from the network
directory and the
configuration file.
READALLCONF
READALLCONF [;FORMAT] Reads all data from
the current
configuration record.
READCONF
READCONF fieldname [;FORMAT] Reads selected data
from the current
configuration record.
SUMMARYCONF
SUMMARYCONF subsysem[, subsystem[, ...]] Prints a report for
one or more
communications
subsystems.
UPDATECONF
UPDATECONF Updates the current
path in the
configuration file.
Command Syntax Action