Configuring and Managing MPE/iX Internet Services (August 2002)

Chapter 4
BOOTP Service
Implementation Differences
62
# bootpquery 0800092175ff
Received BOOTREPLAY from hpmpe992.cup.hp.com (15.19.134.20)
hardware Address: 08:00:09:21:75:ff
Hardware Type ethernet
IP Address: 15.19.123.53
Boot file: (None)
RFC1048 Vendor Information:
Subnet Mask: 255.255.248.0
Log Server 15.19.134.20
Host Name; hpljnet2
Tag #144 [104, 112, 110, 112, 108, 106,
110, 101, 116, 46, 99, 102, 103]
Implementation Differences
The implementation of bootpd on the HP e3000 differs from bootpd on the HP 9000 in following ways:
• The BOOTP entry in the inetd configuration file must have an MPE/iX compatible user name.
Hewlett-Packard recommends that you use MANAGER.SYS.
• You cannot run bootpd as a standalone server. It can only be run by the Internet daemon.