Configuring and Managing MPE/iX Internet Services (August 2002)

Chapter 7
Samba for MPE/iX Services
Starting and Stopping Samba for MPE/iX
102
Verify Link Configuration
The default assumes that LAN link configuration in NMMGR is SYSLINK. You need to run the following
command to get the IP address and subnet mask of your HP e3000 system; you will need this information for
future Samba for MPE/iX configuration file updates with the “interfaces” parameter.
1. Logon as manager.sys
2. Enter the command Netcontrol status; net=LAN1