Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Chapter 3
95
• If you are also configuring PAD connections on this card, remember
that PAD connections use SVCs out of the pool of available SVCs.
You will need to balance your PAD support requirements with your
system-to-system requirements to find the optimum configuration
for your network.
• The total number of SVCs available may also be limited by your
PSN subscription.
System X.25 address This is the X.25 address of the X.25 card, to be used for
system-to-system connections. For most connections to public data
networks, this will be the DTC/X.25 Network Access card address plus
a unique subaddress for the host system. Each address in this table
must be unique.
Note that with certain networks (such as Transpac, in France) the
called address is removed from incoming call packets and the calling
address is added to outgoing call packets by the network. For these
networks, enter only the subaddress in this field, not the full X.25
address.