Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Chapter 3
74
Step 8: Select DTC Type
The DTC Configuration Selection screen (Figure 3-7) is displayed when you press the
[Go
To DTC]
key at the Host Configuration screen. Here you specify the type of DTC to
configure.
Figure 3-7 DTC Configuration Selection Screen
1. Select the DTC type by pressing one of the function keys:
[DTC16iX]
,
[DTC16MX/RX]
,
[DTC16]
,
[DTC48]
, or
[DTC72MX]
.
NMMGR will take you to the configuration screen for the specified DTC type.
NOTE You may use the
[List DTCs]
key on the DTC Configuration Selection screen to see a list of
all DTC names configured on your system.